Home Addition Cure Silicone Putty Condensation Cure

Elastosil M 4600 US                                                 

 

 

Elastosil M 4600 US A/B is a 20 duro RTV-2 silicone rubber.  It's a pourable, addition-curing high strength silicone that can be vulcanized at room temperature, or at elevated temperatures to increase the rate of cure.

Features

  •  cures to nominal 20 duro Shore A hardness
  •  very good flow
  •  non-shrink cure at room temperature
  •  good transparency for visual control

Basic Typical Physical Properties

RubberWorks RTV Data Sheet

Elastosil M 4600 US A/B

Property Test Procedure Component A   Component B
Appearance   Transparent   Colourless
Density, 23 C, g/cm3 DIN 52 479 A 1.10   1.00
Viscosity, 23 C, mPas Brookfield 20,000   12,000
      Mixed 10:1 Ratio  
Hardness, Shore A DIN 53 505   20  
Tensile Strength, psi DIN 53 504 S3   870  
Elongation at Break, % DIN 53 504 S3   700  
Tear Resistance, ppi ASTM D624, B   140  
Linear Shrinkage, %     < 0.1  
Viscosity, 23 C, mPas Brookfield   15,000  
Appearance     Transparent  
Typical Values shown are not intended for use in the preparation of specifications

Contact RubberWorks for a complete Wacker Data Sheet describing this Elastosil product

M 4600 US is supplied in kits consisting of A and B Components

            Call RubberWorks for the detailed Wacker Elastosil Data Sheet

 

Home ] Up ]

Send mail to Info@RubberWorksInc.com with questions or comments.  RubberWorks Inc is your Canadian source!
Last modified: December 28, 2010

Elastosil, Semicosil, and Powersil are registered trademarks of Wacker Chemical.